Posted on

桑德蘭大學會計與金融管理論文例文-Ratio Analysis

會計論文代寫

鑒于會計與金融已經成為近些年的熱門專業,君道論文小編為大家提供一些金融與會計管理的論文。此篇例文是以桑德蘭大學會計與管理專業的論文范本。

<标题>寫作要求是一個具體的情景(這也是國外大學經常會遇到的情況,通常會把同學們放到一定情境中來解決實際問題,培養學生的實際解決問題的能力)。這里同學們假設是一名financial manager at Lynam PLC, a garden tool manufacturer. 董事會查閱了公司近兩年的財務報表,并集中關注于公司的盈利能力和償債能力(profitability and liquidity)。公司近兩年的財務報表如下:

<标题>根據以上情景,學生需要完成下列兩個任務:

1.Prepare a report for the Board of Directors that evaluates the performance of Lynam PLC in relation to profitability, liquidity, gearing and asset utilisation. Your report must be supported by the calculation of relevant ratios in the four evaluation areas mentioned above.

2.Calculate the Working Capital Cycle in days for Lynam PLC based on the information above, assuming 365 days, for the years 2015 and 2014 AND briefly comment on the company’s liquidity position in 2015 compared to 2014. (round to the nearest day)

All calculations should be clearly shown including all appropriate workings, and should be made to the nearest £000 or two decimal places where required.

了解了要求,我們就要開始具體的寫作:

Part A; Lynam Plc Financial Analysis

<标题>This has evaluated the financial health of Lynam Plc in terms of liquidity, profitability, working capital cycle and asset utilizations for the two financial years, 2014, and 2015. The findings of this evaluation are depicted in the following subheadings.

1.1 Lynam Plc’s Profitability Evaluation

Lynam Plc’s profitability as depicted by financial ratios such as return on capital employed, return on equity, gross profit margin and net profit margin is as reflected in the table below.

Table 1; Lynam Plc’s Profitability Ratios

The findings of the above evaluation reveals that Lynam Plc’s profitability has declined between 2014 and 2015.  First the decline in profitability is exhibited by the decline in gross profit margin ratio from 43.83% in financial period 2014 to 40.67% in financial year 2015.  This decline could be attributed to two aspects. First, Lynam Plc’s gross profit margin decreased because of 12.90% increase in cost of sales in financial period 2015. Secondly, the direct costs such as cost of sales increased at a relatively higher rate (12.9%) than firm’s revenue (6.89%), thus having a huge offseting effect on the firm’s gross profit. Moreover, the decline in Lynam Plc’s profitability is also depicted by a decline of ROCE from 22.84% in year 2014 to 19.38% in year ending 2015. Similarly, Lynam’s net profit margin decreased from 11.32% in year 2014 to 7.87% in year 2015.  The decline in ROCE and net profit margin ratio can be attributed to escalation in Lynam’s operational costs as well as depreciatin expensses from the 2014 to 2015. Moreover, the analysis of Lynam’s balance sheet also revealed that its interest expenses increased, an outcome of the acquisition of more debt capital. The decline in firm’s net profit margin has also resulted into massive cut in shareholder returns. This is depicted by the decrease in return on equity capital from 52.20% in year 2014 to 37.91% in year 2015. Overall, as revealed by the analysis, the decline of Lynam Plc’s profitability is an outcome of heightened interest expenses, operational costs as well as cost of sales.

1.2 Lynam Plc’s Liquidity Evaluation

<标题>The ability of Lynam Plc to execute or offset its working capital activities was evaluated using the quick ratio and current ratio. The findings are reflected in the able below.

Table 2; Lynam’s Liquidity Ratios

<标题>From the above evaluation, it is clear that Lynam Plc’s liquidity increased amid the 2014-2015 financial periods. First, this is exhibited by an increase in the current ratio from 1.55 to 1.77 amid the 2014 and 2015 periods respectively. From the analysis of Lynam Plc’s balance sheet, the increase in current ratio can be attributed to two factors. First, it’s the increase in firm’s trade receivables and inventories in the 2014-2015 financial periods. In this case, increase firm’s trade receivables could be an outcome of less stringent credit policy. On this note, Airout (2017) asserts that the enhancement in firm’s inventories and trade receivables is an indication of firm’s reduced efficiency in selling its products as well as in collecting its debts from its debtors. The increased liquidity of Lynam Plc could also be explained by the revamped acid-test ratio or quick ratio from 0.83 to 0.93 amid the 2014-2015 financial periods. This is an indication that Lynam Plc is depending more on its liquid assets than non-liquid assets in financing its working capital operations.

1.3 The Evaluation of Lynam Plc’s gearing

<标题>According to Ojo (2014), gearing ascertains the proportions of debt and equity capital, which is used in financing firm’s investment decisions. In doing so, the analysis of firm’s gearing is able to reveal the susceptibility of the firm to risks such as insolvency or bankruptcy risks. The gearing of Lynam Plc amid the 2014-2015 financial period is reflected in the table below.

Table 3; Lynam Plc’s Gearing Ratios

From the above evaluation, it is vivid that Lynam Plc is highly geared. This means that the company uses more of debt capital than equity capital to fund its investment decisions. This is depicted by a gearing ratio, which is above the 50% threshold in 2014 and 2015. Secondly, the increase in the gearing ratio from 74.98% to 76.60% amid the 2014-2015 financial periods can be attributed to intense borrowing of long term loans in 2015. Also, from the above evaluation, it is clear that Lynam Plc experienced a decrease in its interest coverage ratio from 5.42 to 2.90 amid the 2014-2015 financial periods. The decline in interest coverage ratio insinuates that the ability of the firm to offset its interest expenses of long-term loans is declining. From the analysis of Lynam Plc’ income statement, it is clear that the decline in interest coverage ratio can be attributed to decline in its operating profit, which an outcome of heightened operating expenses. 

1.4 Asset Utilization

<标题>According to Merville and Tavis (2013), asset utlization mirrors the efficiency deployed by the firm in making use of its assets to generate ample returns or profits. The asset utlization of Lynam Plc is depicted in the table below.

Table 4; Lynam Plc’s Asset Utilization

From the above evaluation, the Lynam’s days sales outstanding escalated from 56 days in the year ending 2014 to 66 days in the year ending 2015. According to Knight (2012), days’ sales outstanding is a financial metric that ascertains how well company’s receivables are being managed. The rise in days’ sales outstanding at Lynam Plc is an indication that over the last two years (2014 and 2015) majority of sales in that company are made on credit.  This is depicted an increment in trade receivables. Also, from the above evaluation, Lynam Plc’s days’ inventory outstanding decreased from 120 days in the year 2014 to 119 days in the financial year 2015.  According to Migiro (2014), days’ inventory outstanding is a financial metric that ascertain the number of days taken by the company to dispose its inventories to its actual buyers. As such, there was a margnal improvement in Lynam Plc’s efficiency in converting its stocks into sales amid the 2014 and 2015 financial periods. The analyis in table 4 also depicts that there was a reduction in the days’ payables outstanding from 71 days to 56 days amid the 2014 and 2015 financial periods respectively. According to Osipenkova (2016), days’ payables outstanding elucidate the period taken by the firm to payoff its creditors. The reduction in days payables outstanding is a good sign at Lynam Plc since the management can be able to establish an amicable relationship with firm’s suppliers. According to Pacurari and Muntean (2008), an establishment of an amicable relationship between the firm and the supplier nullifies any chnaces of halting the production process because of inefficiencies in supply of raw materials. 

1.5 Working Capital Cycle

The working capital cycle of Lynam Plc is exhibited in the table below.

Table 5; Lynam Plc’s Working Capital Cycle

<标题>The analysis in the above table reveals a worsening working capital cycle. This is because it escalated from 105 days to 129 days amid the 2014-2015 financial periods. According to Tran, Lin and Nguyen (2016), an increasing working capital cycle mirrors the diminishing ability of the firm to offset its daily operations since most of its finances are tied to inventories or trade receivables. This implies the company’s

<标题> For this reason, Lynam Plc need to adopt intensive marketing strategies in order to foster fast movement of its products from its inventories to the market. Also, Lynam needs to adopt a stringent credit policy in order to enhance the collection of money from its debtors.

當然,這個例文只是寫作的一部分,想要了解更多關于會計與金融論文的寫作,可以@我們君道論文的客服喲

Posted on

account essay代寫-會計論文寫作要點與例子

會計論文代寫

論文寫作是留學生取得成績,最終畢業和取得學位的必備條件。不過也有不少留學生在寫作論文時,感到頭痛, 不知道論文該怎么寫,下面我就為大家介紹一下會計論文怎么寫?具體寫作方法有哪些?

一、會計論文的寫作要求

(一)科學性

會計論文的科學性要求以會計科學理論和科研實踐為基礎,采取嚴謹的態度去探求未知,得出結論。論文要立論客觀、論據可靠充分、論證嚴密有力。

(二)創新性

會計論文要求有自己的見解,可以是在會計理論研究及會計實踐等方面解決了前人長期沒有發現的一些問題,提出了解決問題的新方法以及提出了具有科學依據的新觀點或新的理論模型。

(三)應用性

會計論文應取材于會計實踐的各個環節,通過分析、總結會計理論知識和會計實務操作,發現新問題、研究新現象、探討解決實際問題的方法與途徑,然后再運用于會計實踐環節中,指導會計人員及企業管理人員的實際工作,使其更好地參與經濟管理活動。

<标题>了解了會計論文的寫作要求,君道論文小編帶同學們進入今天的正題,如何寫好一篇會計論文。在開始論文寫作之前,我們需要做好準備工作。

二、論文寫作前的準備

(一) 搜集資料

<标题>1.進行調查研究,獲取第一手資料。大量實用的富有價值的第一手財會材料存在于人們的社會實踐中,有的尚未被人們用書面的形式記錄下來,這些都需要我們通過實地調查去獲得。如各業務部門和企業的規章制度、財務管理的經驗總結、財務分析報告、憑證賬簿及報表內容格式等重要的實際業務資料,都需要通過社會調查獲得。

2.利用圖書館、資料室及電子網絡,查找文獻資料。利用該途徑搜集資料應熟悉圖書分類法,善于利用書目、索引,要熟練地使用其他工具書,如年鑒、文摘、表冊、數字等。同時,盡可能“上機”通過互聯網尋找所需資料并下載,最大可能地節省時間,節約成本。

(二) 核實整理資料

<标题>1.對搜集到的材料首先要認真加以鑒別,查清各種指標的來龍去脈,前因后果,保證資料的準確、及時、完整。然后認真刻苦研究,消化搜集來的材料,對資料進行篩選,以便有重點、有計劃、有目的地加以利用。

2.數據處理

<标题>數據是會計論文寫作的重要資料,對數據的處理主要包括:詳細列出有關數據,保留科學的有代表性的數據;對某些數據根據需要進行整理和運算;運用圖表顯示變化的規律和在不同變化條件下的數據狀態;對數據進行必要的分析,得出正確的結論。

<标题>(三) 確定論文提要

<标题>論文提要是內容提綱的雛型。一般論文、都有反映全篇文章的內容提要,幫助讀者通過翻閱提要,便能知道論文的大概內容。在執筆前把論文的題目和大標題、小標題列出來,再把選用的材料插進去,就形成了論文內容的提要

(四) 擬定提綱

草擬會計論文提綱的過程,是整理思想、進行構思的過程。通過草擬提綱,可以規劃基本內容,搭好基本框架,使自己的思想明確化、條理化,還可以發現構思的缺陷、材料的不足、論據的不充分、思路的不清晰,使論文寫作少走彎路。會計論文提綱一般應包括文章的基本論點和主要論據,反映文章的體系結構。簡單地說,論文提綱要列出一級標題、二級標題,如有需要再作一些說明。會計論文的提綱擬訂以后,為將要寫成的論文描繪了一個輪廓,或者說畫出了一幅藍圖。 論文提綱可分為簡單提綱和詳細提綱兩種。簡單提綱是高度概括的,只提示論文的要點,如何展開則不涉及。這種提綱雖然簡單,但由于它是經過深思熟慮構成的,寫作時能順利進行。沒有這種準備,邊想邊寫很難順利地寫下去。

這里君道論文小編要特意強調一下,擬定論文提綱的原則,如下四個方面:


(一)要有全局觀念,從整體出發去檢查每一部分在論文中所占的地位和作用。看看各部分的比例分配是否恰當,篇幅的長短是否合適,每一部分能否為中心論點服務。比如有一篇論文論述企業深化改革與穩定是辯證統一的,以中國××市某企業為例,說只要干部在改革中以身作則,與職工同甘共苦,可以取得多數職工的理解。從全局觀念分折,我們就可以發現這里只講了企業如何改革才能穩定,沒有論述通過深化改革,轉換企業經營機制,提高了企業經濟效益,職工收入增加,最終達到社會穩定。
(二)從中心論點出發,決定材料的取舍,把與主題無關或關系不大的材料毫不可惜地舍棄,盡管這些材料是煞費苦心費了不少勞動搜集來的。有所失,才能有所得。一塊毛料寸寸寶貴,臺不得剪裁去,也就縫制不成合身的衣服。為了成衣,必須剪裁去不需要的部分。所以,我們必須時刻牢記材料只是為形成自己論文的論點服務的,離開了這一點,無論是多少好的材料都必須舍得拋棄。
(三)要考慮各部分之間的邏輯關系。初學撰寫論文的人常犯的毛病,是論點和論據沒有必然聯系,有的只限于反復闡述論點,而缺乏切實有力的論據;有的材料一大堆,論點不明確;有的各部分之間沒有形成有機的邏輯關系,這樣的論文都是不合乎要求的,這樣的論文是沒有說服力的。為了有說服力,必須有虛有實,有論點有例證,理論和實際相結合,論證過程有嚴密的邏輯性,擬提綱時特別要注意這一點,檢查這一點。
在編寫論文提綱時還要注意:
第一,編寫論文提綱有兩種方法:一是標題式寫法。即用簡要的文字寫成標題,把這部分的內容概括出來。這種寫法簡明扼要,一目了然,但只有作者自己明白。論文提綱一般不能采用這種方法編寫.二是句子式寫法。即以一個能表達完整意思的句子形式把該部分內容概括出來。這種寫法具體而明確,別人看了也能明了,但費時費力。論文的提綱編寫要交與指導教師閱讀,所以,要求采用這種編寫方法。
第二,提綱寫好后,還有一項很重要的工作不可疏忽,這就是提綱的推敲和修改,這種推敲和修改要把握如下幾點。一是推敲題目是否恰當,是否合適;二是推敲提綱的結構。先圍繞所要闡述的中心論點或者說明的主要議題,檢查劃分的部分、層次和段落是否可以充分說明問題,是否合乎道理;各層次、段落之間的聯系是否緊密,過渡是否自然。然后再進行客觀總體布局的檢查,再對每一層次中的論述秩序進行“微調”。
第三,論文寫作一般要求提綱擬到以下層次
——————————————————————————–
總論點 { { { 1.(稱段旨)
(一)(稱下位論點) 2.
一、(稱上位論點) ……
(二)
……
二、
……
<标题> (四)論文的基本結構由序論、本論、結論三大部分組成。序論、結論這兩部分在提綱中部應比較簡略。本論則是全文的重點,是應集中筆墨寫深寫透的部分,因此在提綱上也要列得較為詳細。本論部分至少要有兩層標準,層層深入,層層推理,以便體現總論點和分論點的有機結合,把論點講深講透。

三、開始寫作論文

寫作要求介紹

1.運用綜合分析方法,反復思考,形成論點。寫作財務會計論文,就要堅持三步走戰略:提出問題、分析問題、解決問題。

2.主題突出,明確論點。寫好財務會計論文,要有一個中心思想,各方面的論證例證,都應圍繞這個中心思想展開。會計論文的論述要開門見山,突出主要觀點,論文的論點要鮮明。

<标题>3.層次分明,詳簡適當。寫會計專業論文要注意體系結構的安排。論文內容的敘述,要有簡有詳。至于作者的新意,有爭論的觀點,則要講透,絕不吝惜筆墨。

<标题>4.注意書寫規格,講究語法。會計論文前面要列出目錄,文后要寫出引文注釋和主要參考書目。如果論文較長,文章本身可分為前言、正文、結束語幾部分,另外寫出內容提要。行文要講究語法,防止文句不通、用詞不當。

<标题>5.會計論文初稿寫成后,必須認真加以修改,這是提高論文質量的重要保證。文章的修改可以說是無止境的,大至問題提得是否鮮明確切、結構層次是否嚴密合理;小至文字的修飾加工,標點符號的推敲運用。一篇高質量、高水平的論文,是需要字斟句酌、精雕細刻的。

下面,君道論文小編為同學們提供the example for the steps of making outline。以《a research on how cultivate and perfect labor market in construction industry》為例,簡單提綱可以寫成下面這樣:
一、abstract
二、Contents
(一)The precondition of cultivating construction labor market
(二)the current condition of construction labor market
(三)measures for cultivating and perfecting construction labor market
三、conclusion ?

上述是簡要提綱,接下來根據簡要提綱,君道小編給出詳細提綱,詳細提綱是把論文的主要論點和展開部分較為詳細地列出來。如果在寫作之前準備了詳細提綱,那么,執筆時就能更順利。下面仍以《a research on how cultivate and perfect labor market in construction industry》為例,介紹詳細提綱的寫法:
一、abstract

二 introduction
1.提出中心論題;
2,說明寫作意圖。
二、main body
(一)The precondition of cultivating construction labor market
1.市場經濟體制的確立,為建筑勞動力市場的產生創造了宏觀環境;
2.建筑產品市場的形成,對建筑勞動力市場的培育提出了現實的要求;
3.城鄉體制改革的深化,為建筑勞動力市場的形成提供了可靠的保證;
4.建筑勞動力市場的建立,是建筑行業用工特殊性的內在要求。
(二)the current condition of construction labor market
1.Buyer’s market: oversupply;
2,invisible market:有市無場;
3.易進難出的畸形市場;
4,交易無序的自發市場。
(三)measures for cultivating and perfecting construction labor market in China
1.統一思想認識,變自發交易為自覺調控;
2.加快建章立制,變無序交易為規范交易;
3.健全市場網絡,變隱形交易為有形交易;
4.調整經營結構,變個別流動為隊伍流動;
5,深化用工改革,變單向流動為雙向流動。
三、conclusion
1,概述當前的建筑勞動力市場形勢和我們的任務;
2.呼應開頭。

上面所說的簡單提綱和詳細提綱都是論文的骨架和要點,選擇哪一種,要根據作者的需要。如果考慮周到,調查詳細,用簡單提綱問題不是很大;但如果考慮粗疏,調查不周,則必須用詳細提綱,否則,很難寫出合格的論文。總之,在動手撰寫論文之前擬好提綱,寫起來就會方便得多。 結合上文,君道論文小編,再次和同學們總結概括編寫論文提綱的方法:
1.先擬標題;
2.寫出總論點;
3.考慮全篇總的安排:從幾個方面,以什么順序來論述總論點,這是論文結構的骨架;
4.大的項目安排妥當之后,再逐個考慮每個項目的下位論點,直到段一級,寫出段的論點句(即段旨);
5.依次考慮各個段的安排,把準備使用的材料按順序編碼,以便寫作時使用;
6.全面檢查,作必要的增刪。

Posted on

accounting論文代寫范文-Target Costing

accounting論文代寫范文

目標成本核算是一種確定必須生成具有指定參數的產品以生成所需回報率的成本的方法。它涉及發展階段的成本分析以及將總成本保持在閾值以下。公司目前使用的成本控制技術在生產階段管理成本方面很有用。然而,由于成本較低,將成本管理工作從生產階段轉移到產品開發階段轉化為更高的利潤。這對于為超市生產手機的公司特別有用,因為超市推動了更加便宜的交易。

Introduction

<标题>Letscommunicate Ltd produces mobile phones for sale in supermarkets. In today’s competitive market of mobile phones with short product life cycles, it is important for mobile phone producers to develop and market products that not only meets the customers demand for features at a certain price level but also generate the desired profits. This essay analyses the benefits and limitations of using target costing and life-cycle costing systems over the existing costing and performance measures used by the company. The current techniques used by the company are useful for keeping costs under control but they do not provide an indication of either the maximum costs allowable for defined product features or profits over the total life of a product.

Target costing

Target costing is a method to determine the cost at which a product with specified parameters must be produced to generate the required rate of return. It involves cost analysis during the developmental phase as well to keep the overall costs below the threshold. The cost control techniques currently used by the company are useful in managing costs during production stage. However, moving cost management efforts from the production stage to the product development stage translates into higher profits because of lower costs . This is particularly useful for companies producing mobile phones for supermarkets because supermarkets drive tougher bargains.

<标题>The benefits of target costing are higher if specific targets for costs and product features are established earlier in the product development cycle . Cost analysis in earlier stages of the product development may indicate whether it is feasible to produce a mobile phone that not only meet customers’ expectations of price and quality but also generates the desired returns for Letscommunicate Ltd. Also, modifications to the product in the initial development stages cost less and will increase the company’s profit and ability to compete better.

<标题>However, the target costing concept will take lower priority if Letscommunicate were to focus on meeting fast time-to-market demands because of shorter time to launch a mobile phone . It is also difficult to forecast price in the future due to rapid technology developments in mobile phones and changes in customer preferences .

Life-cycle costing systems

The competitive nature of the mobile sector means that mobile producers have to not only manage with lower profit margins and shorter product life but also spend a significant amount on developing new products and features. This means that costing methods like absorption costing systems that only look at production costs are less useful because they neglect research and development costs in evaluating profitability of a product. Life-cycle costing systems overcome this drawback as they evaluate costing from the research and development phase through to the eventual conclusion of a product’s life. This approach is useful in determining the overall profits from a product like a mobile phone that has high development costs and a short product life due to new products being launched constantly by competitors.

The major challenge of using the life-cycle costing system is that it would be difficult for Letscommunicate to estimate full life-cycles of a mobile phone in a rapidly changing environment and increasing competition.

Conclusion

Target costing overcomes some of the drawbacks of the current costing and performance techniques used by Letscommunicate as it focuses on maximum allowable costs during the development phase so that the company can generate the required returns. Life-cycle costing is useful as it will incorporate high development costs and short product life in determining the feasibility of a product.

Posted on

會計論文代寫范文-Corporate Governance Arrangements

會計論文代寫范文

<标题>Tesco Plc是全球最大的食品和飲料零售商之一,是一家非周期性公司,其全球投資巨大,包括Warren Buffet的母公司Berkshire Hathaway。基于公司既定的戰略和成熟的商業模式,它是客戶的推薦投資。

Essay Question: Research and evaluate the corporate governance arrangements for Tesco PLC

<标题>Tesco Plc, one of the largest food and beverages retailers in the world is a non-cyclical company that has seen enormous investment from around the globe including Warren Buffet’s parent firm Berkshire Hathaway. On grounds of the company’s established strategy and mature business model it is a recommended investment for the client.

The report:

  • Defines Corporate Governance
  • Discusses Tesco’s governance structure
  • Value drivers for corporate governance

Corporate Governance:

The fundamental pillar as to how corporations are run day to day and all stakeholder interests (shareholders, management, suppliers etc) are taken into consideration is referred to as “Corporate Governance”. The term encompasses the framework for internal controls that a company has in place to help management and those in charge of running the company to act in the best interests of the shareholders (CFA Institute, 2013).

<标题>Principles relevant to Corporate Governance that achieve maximum shareholder wealth are attributed to three fundamentals (CFA Institute, 2013):

  1. Ability of shareholders to voice their opinions and concerns in regard to running of the company with minimum hassle; and
  2. The management responsible for running the company acts in an ethical as well as an independent capacity towards all stakeholders of the company so as to ensure the most efficient running of the corporation
  3. Consistent high quality financial reporting so as to ensure investors are receiving all relevant information in a timely and verifiable manner that eventually results in maximum profitable allocation of resources and capital.

Tesco PLC Structure of Governance

Tesco’s operations around the globe have allowed it to develop a strong and fair framework for running the company across all the markets it operates in. The Board of Directors incorporating the Chairman, the Chief-Executive alongside Non-Executive Directors who provide independent appraisal of the vision of the company whilst adding insight to the strategy lies at the forefront of governance (Tesco, 2014). Furthermore, a senior Independent Director is also present on the Board to ensure all conflicts amongst management and shareholders are resolved in the interests of the shareholders which eventually prevents any “agency problems” or front running by the management in regard to the shareholder investments.

<标题>The specialised tasks of running the company have called for segregations of major duties to respective committees in the corporation. At present Tesco Plc supports its vision with the help of five committees (Tesco, 2014).

<标题>Tesco PLC Board Committees

The major drivers of each committee alongside its evolvement over the years are summarised below.

The Audit Committee: The committee is tasked to ensure that the risk management principles for the company are effective and are consistently updated to keep risk management of Tesco in line with its strategy (Tesco, 2014). Furthermore, interim audits and financial disclosures are verifiable and accurately presented to any person who demands knowledge of them.

The Audit committee is also responsible for recommending the appointment of an independent external auditor for the yearly audit and conducting inquiries into management in regard to any investigative matter it deems fit (Tesco, 2014). Over the years the committee has hired external legal counsel to advice on matters that have raised concern.

“Corporate Governance” Critique for Tesco

  • Presence of knowledgeable financial experts to help the operating environment of the company
  • External auditors appointed through shareholder participation and not by management decision
  • Adherence report in regard to compliance with the UK Governance Code
  • Continuous training of personnel on the committee to remain updated on matters of accountancy and finance

The Remuneration Committee: The Remunerations committee is primarily responsible for determining the compensation agreements of senior management as well as analyse structure of compensations that needs to be extended out to Executive members so as to retain the most competent and diligent executive management for overseeing the company (Tesco, 2014).

<标题>The committee sets out the incentive fee specifications for senior management as well as deliberates on the aptness of expenses that can be claimed by management so as to focus on long term profitability and not short term goals (Tesco, 2014).

“Corporate Governance” Critique for Tesco

  • Disclosures regarding share scheme payments to management are discussed in the Annual Reports or any other public document
  • “Clawback” provisions are present to discourage management from participating in short term profitability at the expense of long term ones
  • Use of external counsels and consultants to ensure no conflict arises in regard to compensation between management and the committee
  • Outlining philosophy for compensation to management and shareholders so as to assess compensation in “Best case” and “Worst case” situations

The Corporate Responsibility Committee: The committee was established in 2012 and incorporates the principles of the Companies Act 2006 to help govern its scope of operation (Tesco, 2014). The committee ensures Tesco acts in a sustainable manner to benefit the communities and environment. Moreover, it considers impact of corporate actions by Tesco or any of its subsidiaries on the ethical culture present across all its markets of operation.

“Corporate Governance” Critique for Tesco

  • Consistent and timely updates on ethical stances of Tesco throughout its financial year and implications of such actions on the communities
  • Updating investor and consumer beliefs in regard to sustainable business model and sourcing of operations for Tesco Plc
  • Develop strong communication channels to ensure investors are aware of business model and the company is living up to its reputation

The Nominations Committee:<标题> The Nominations committee lies at the heart of the company. It is tasked primarily with all matters relevant to management. Acting in accordance with the Companies Act 2006, the committee ensures that executives on the board possess relevant skill to discharge duties, project a vision for the achievement of goals and the balance required between executive and the non-executive directors so as to maintain independence within the organisation (Tesco, 2014). Furthermore, the committee deals with regular appraisal of management so as to make sure the leadership quality of the board is not compromised.

Since its development the committee has also taken up the responsibility to ensure that equitable nomination procedures are drawn and implemented on a firm wide basis as well as a smooth transition mechanism is prevalent for passing over of responsibility when managerial personnel change.

“Corporate Governance” Critique for Tesco

  • Presence of independent members ensure shareholder interests are at the forefront of discussion
  • Linking management performance to compensation by means of regular appraisals helps Tesco ensure that it is extending out the most cost-effective expertise at every level

The Disclosures Committee:<标题> The committee not only makes sure that consistency prevails in financial statements making them easily verifiable but also scrutinizes the annual reports to ensure that accounting estimates or policies are not inappropriate for treatment of various matters (including financial and operating leases) (Tesco, 2014). The committee also deals with incorporating a framework within the firm to handle “material nonpublic information” and how it is to be disclosed.

“Corporate Governance” Critique for Tesco

  • Helps ensure effective risk management with regard to insider information and assessing best course of action to dealing with speculations in the market
  • Enhancing investor confidence by making sure that notes to the financial statements are comparable over periods of time

<标题>The Corporate Governance framework at the Executive Management level is limited to the Board, the Board’s composition and the committees formed to review their respective matters. To deal with corporate governance on a business strategy level Tesco ensures that each division possesses its own strategic plan to enhance performance and help achieve the company’s vision. The committees can be thought of as being responsible for a distinct business segment of the company and at the moment are made up of the following (Tesco, 2014):

  • Compliance Committee
  • Multichannel Committee
  • People Matters Group
  • Property Strategy Committee
  • Social Responsibility Committee
  • Technology Committee
  • Commercial Committee

<标题>Given the nature of the work of such committees the overall oversight responsibility lies with the Chief Executive of the company. These add value by ensuring the laying down of a strategy for fulfillment of objectives.

<标题>A brief critical outline for other minor stakeholders is also provided below. However, corporate governance should be more closely linked with management, the Board and shareholders. (CFA Institute, 2013).

Customers

Tesco’s “Clubcard” rewards programmes and the “Finest Product” range helps the mature company retain its trusted image. Customers see such aspects as the most value efficient means for satisfying their needs. A store format from hypermarkets to corner stores ensures that each store type caters to the unique needs of the community it is housed in. Tesco’s ability to house a multichannel leadership under one roof helps keep barriers to new entrants high and protect market share in the UK.

Employees

<标题>Tesco places immense importance on the skill and betterment of its employees. The company trained more than 250,000 employees last year in light of turning around the company. The employees are not only encouraged to suggest improvements in stores or company policies through Tesco’s feedback approach but are also made to feel as an intangible asset of the company by continuous investment in their betterment.

Regulators

<标题>Legislation has a huge impact on how Tesco conducts its businesses around the globe. The impact is further magnified when the company’s policies are in the spotlight. Anti-competitive and employment legislation have affected Tesco the most over the years, whether in developing or developed markets (Tesco, 2014). For a better public image and to comply with local legislation Tesco actively hires from the local community where new stores are opened. Furthermore, Tesco actively participates in sustainability projects where its huge hypermarket stores open up so as to benefit the community.

Suppliers

<标题>Tesco’s significant market share allows it to obtain favorable terms from its suppliers from a monetary point of view whereas special teams such as the agricultural team within the corporation help make sure that the company obtains products of utmost quality from its suppliers (Tesco, 2014). Moreover, the “protector line” initiative by Tesco under which any wrongdoing on part of the supplier can be raised by the suppliers’ employees on behalf of Tesco would enable Tesco to improve its operations (Tesco, 2014).

Having analysed the broad corporate governance framework prevalent at Tesco, improvements that can be instituted to reflect better corporate publicity and reputation are related to three main aspects of the company. The table below illustrates methods for strengthening the prevalent model.

The BoardElection policy of the Board members should be with staggered whilst keeping a majority of independent members at all times thus making sure that shareholders’ interests are paramountRelated party transactions or any conflict of interest arising from people serving on the Board should be disclosed in all interim reports and annual reportsThe board should meet without the presence of the management so as to prevent any over riddance of independenceLittle or no barriers to communication with investors or shareholders should be prevalent
ManagementEstablish a Code of Ethics to dictate corporate culture of the firmIncreased transparency of options, their exercise period and fees paid out to management for their services rendered (currently amounts disclosed in Financial Statements)Choosing the optimal “peer group” to benchmark performance so as to allow for the most meaningful comparisonThe use of company assets and property should be limited to circumstances as determined by shareholders and the usage as such should be disclosed at the Annual General Meeting
ShareholdersUse of different share classes with different voting powers are fully known to the shareholderWhether the company allows for shareholders to cast their vote in absence (proxy voting)Procedure for raising concerns at the Annual General MeetingProcedures that need approval from the shareholders prior to implementation by the management ( such as defenses in takeovers)

Recommendation Summary

<标题>The complex and ever-changing nature of Corporate Governance does not allow for a limited set of principles that govern the matters. The interpretation of the framework for the corporate governance lies with the collaborate interaction of the shareholders and the management.

<标题>Given Tesco’s strong framework to delegate matters of public interest and scrutiny to committees independent of the Board and delegating internal strategy vision to segments within the corporation, Tesco successfully ensures that all stakeholder interests are looked after at all times.

The continuous updating of the foundations that form the Corporate Governance framework allows the company to retain its strong customer base and investor confidence. The internal review and revamping of the company’s strategic committees after the “Horse-meat scandal” ensure that the company strives to deliver the very best of responsibility at all levels. Given the responsibilities of various committees of the Board and a “Corporate Code of Ethics” within the firm it is safe to conclude that the company has established an effective corporate governance framework.

Reference List

CFA Institute (2013). Corporate Finance & Portfolio Management. USA: Wiley.

Tesco PLC [2014] Annual Report [Online] Available from www.Tescoplc.com/files/pdf/reports/ar14/download_annual_report.pdf

Bibliography

Gray, I. & Manson, S. (2011). The Audit Process. 5th ed. USA: South Western – Cengage Learning.

Hillier, D., Ross, S. & Westerfield, R. (2010). Corporate Finance. 1st European Edition UK: McGraw-Hill Higher Education

Robinson, T., Greuning,H., Henry,E. & Broihahn, M. (2009). International Financial Statement Analysis. USA: John Wiley & Sons Inc

<标题>Seal, W., Garrison, R. & Noreen, E. (2009). Management Accounting. UK: McGraw Hill Higher Education

Posted on

會計論文代寫范文-管理會計系統

Management Accounting

Executive Summary

The company’s profits are falling and there is a build-up of inventory within the production process. This report considers three management systems which could rectify the situation. Considering theory of constraints, just in time and programme evaluation and review technique, the report recommends that more information regarding the cause of the problems is undertaken, and a suitable programme of revaluation of the business processes is undertaken.

Introduction

<标题>The role of management accounting in the organisation has become so much more that the reporting of the score to managers (Hansen, Mouritsen 2006). In the wake of the decline of Western Manufacturing and the relevance crisis of management accounting to modern business as outlined by Kaplan and Johnson in ‘Relevance Lost’, the traditional cost accounting approach has been largely replaced by alternative methodologies (Kee, Schmidt 2000). The role of the management accounting in the modern firm is not only to report the score, but to seek to influence the score by using techniques and theoretical approaches to improve the business processes. As such it is important for managers to understand the use and usefulness of a variety of alternatives to traditional accounting approaches, especially traditional cost accounting and look to introduce other techniques which may have practical advantages for the firm (Dugdale, Jones 1998). There is no one size fits all approach which will work in any case and the application of cost accounting can and will always provide key information about how the business is doing in terms of its goals. Indeed many of the newer techniques focus on particular applications within industry and each of them has something to offer the firm in terms of improving the business processes (Plenert 1993). This report considers three approaches in the context of practical application to a range of common problems, problems which may be responsible for the inventory build-up of the firm in question and its declining profits. The approaches are the Theory of Constraints (TOC) and the attendant logic of Throughput Accounting (TA), Just in Tim Inventory Management (JIT) and wider implications to ‘Lean’ manufacturing methodologies and the Program Evaluation and Review Technique framework (PERT). The report outlines the main features of these methodologies and the advantages and limitations of them with specific reference to their usefulness in a variety of practical situations. The report concludes that each of the methodologies has something to offer and that any management decision must be based on the goals and objectives of the company and its strategic direction.

Theory of Constraints and Throughput Accounting

<标题>Developed by E.M. Goldratt as a response to the criticisms of traditional cost accounting, the TOC states that the traditional variable costs of Cost Accounting do not apply, or rather, they apply with less rigour in a modern management situation (Bragg 2007). In the past Labour was seen as a totally variable cost, workers would work to the management’s discretion and short time and layoffs were dictated by the level of production need. Goldratt argued that this was no longer the case as changes to society and legislation had meant that the workforce was more of a fixed cost for the organisation (Wei, Liu et al. 2002). The TOC states that even though modern managers are still evaluated by labour use, such efficiencies can lead to decisions which harm the organisation rather than help optimise production. This criticism led Goldratt to develop the TOC as an alternative system, identifying ‘constraint’ as a decision relevant concept in the service or production process (Watson, Blackstone et al. 2007).

The central idea to TOC and TA is that each organisation has a specific goal (or a set of specific goals) which can be effected by decision making, better decision making leads to better completion of the goals (Linhares 2009). If one takes the normative assumption of a profit orientated organisation as the maximisation of the owner’s wealth, then the ‘goal unit’ will be the ‘throughput contribution’ (TC) which is similar to the ‘total contribution’ marginal costing (Hansen, Mouritsen 2006). The difference in TA is that ‘throughput contribution’ is defined in the TOC as Sales (S), less total variable cost (TVC) which is he cost of raw materials (not labour). This is placed in the context of two further conceptual mechanisms, Investment (I), which refers to money tied up in the system in terms of inventory and work in progress, as well as with machinery and buildings and the like, the second is Operating Expense (OE) which is the money spent by the system on generating goal units, but not the cost of raw materials, so items such as utilities and wages (Davies, Mabin et al. 2005).

This delineation of the costs of production and services allows the processes to be viewed in terms of a number of optimization questions. Typically firms need to ask themselves how throughput (TC) can be increased, how Investment (I) can be reduced and how Operating Expense (OE) can be reduced. These questions in turn will affect the Net Profit, Return on Investment, Productivity and Investment.

Therefore it can be argued that the maximisation of throughput contribution is key to the maximisation of all of the above key performance indicators. The firm can seek to maximise TC by optimising a number of aspects of the production processes. There are five common steps associated with this process;

  • Identify the system constraints
  • Exploit the system constraints
  • Subordinate everything else to the decisions made
  • Elevate the system’s constraints
  • Restart the process if a constraint has been broken

The following example illustrates the process.

Company A has two workers and produces two products (Workers, A,B, Products X & Y). Product Y Requires ten minutes of Worker A’s time, and product X requires fifteen minutes. Potential demand for X is 100 units, for Y is 50 units. If the total time available to worker A is 2000 minutes per week Worker A is not a constraint as the total time to manufacture both products is equal to the total available time (15 minutes x 100, 10 minutes x 50 = 2000 minutes). Worker B also works on the two products but takes 15 minutes on both products (15 minutes x 100, 15 minutes x 50 = 2250), assuming that Worker B has the same maximum time available (2000 minutes) there is a constraint around Worker B. Thus the constraint has been identified. 
Step two seeks to exploit the constraint. Concentrating on Worker B as this is where the constraint occur, the exploitation of the constraint means the company (according to its goal of maximising wealth) needs to make a decision based on how to allocate production. To do this the managers need to know what the Throughput Contribution is for each unit. Assume that TC for product X is £75 per unit and for product Y it is £120 per unit. The constraint here is time, measured in units of a minute, therefore the TC per unit of constraint is found by dividing the TC by the time taken with each worker, at the point of constraint this is as follows (X, 75/15 = £5, Y, 120/15 = £8.33), as there are only 2000 minutes available the TOC suggests that all 50 units of product Y should be produced with a total time taken of (50 x 15 = 750, TC = £8.33 x 750 = £6247.5) leaving 1250 minutes to produce product X (TC 1250 x £5 = £6250). Net profit will therefore be (6247.5 + 6250 = £12497.5). In this example this is how the TOC makes all other considerations subordinate to this decision.

TOC does have its problems, it makes many of the normative assumptions about the behaviour of costs that traditional cost accounting does, and largely ignores costs of changing the activities of many of the business processes to suit a particular set of circumstances (Rand 2000). Yet it is a powerful decision making tool and one which, if used properly can alter the success of a manufacturing process in terms of the goal of maximising the wealth of the company .

Just In Time (JIT)

JIT Inventory Management is one of a set of ‘Lean’ manufacturing methodologies which has grown out of the Japanese Approach to management accounting (Abdul-Nour, Lambert et al. 1998). In particular much of modern JIT management is based on the Kanban system of Inventory management which is a part of the Toyota Production System (TPS) which is famous the world over for its efficiency and speed to market with new products (Houghton, Portougal 1997). JIT as a part of a Lean system relies upon the pull of the market rather than the push of production targets and generally states that investment in inventory, both in terms of raw materials and work in progress, also finished goods, represents a waste to the company (White, Prybutok 2001). JIT requires the accurate organisation of the production process in terms of both processes and components of production and finds a minimum level of stock holding at every level of the process. The original Kanban system was based around a set of two cards which accompanied an individual component through the production process. At each point where a component was removed from stock to be used in a process of manufacturing one of the cards would be returned to the previous process to alert that process that another was required. This meant that without the aid of sophisticated computers the TPS managed to cut its value of stock in the factory to a fraction of what it had been, requiring less investment of working capital, lower overheads in terms of storage and warehousing, and less risk of over production of any components or of finished goods (Abdul-Nour, Lambert et al. 1998).

<标题>JIT is a system which has largely been adopted in many of the larger production facilities which have adopted ‘Lean’ technology. These range from most car manufacturers to manufacturers of high technology. But there is growing evidence that it may be very useful in terms of the smaller manufacturer, and even the service industry, especially as the cost of raw materials is rising in the face of increased demand for core materials (Abdul-Nour, Lambert et al. 1998, Khan, Sarker 2002).

<标题>JIT is difficult to implement and requires considerable investment in the production processes (Hansen, Mouritsen 2006, Houghton, Portougal 1997). It is impossible to implement JIT unless there has been a programme of business process redesign to allow such minimum stock levels to be held, and this can present a large investment cost in the firm which may or may not ultimately benefit from such an inventory management programme. JIT requires the firm to invest heavily in partnerships with suppliers as well and to evaluate the supply chain from almost every angle to prevent a total collapse of the production system (David, Eben-Chaime 2003). This is because there is little room for error in the process, if demand is poorly predicted and is higher than expected then the firm will run out of the raw materials of production and may lose custom (Kelle, Al-khateeb et al. 2003). If lower than predicted the firm will not have the capacity to store inventory (die to process redesign). Further if suppliers fail to deliver for any reason the process will come to an abrupt halt. JIT therefore requires a significant amount of managerial information from both the external market and the internal processes to get right and there have been many cases of difficult implementation, especially in smaller companies (Abdul-Nour, Lambert et al. 1998).

Notwithstanding this there is a lot of evidence that with more and sophisticated modelling techniques from increasingly advanced technology, JIT systems are getting easier to implement (White, Prybutok 2001, Yasin, Small et al. 1997). Therefore as long as the systems are set up correctly there are major advantages in reducing the waste of inventory throughout the process of manufacturing. Because of its requirements, and making everything subordinate to the level of inventory, it is not applicable for JIT systems to be used in conjunction with the Theory of Constraints, as managers are unable to subordinate all decisions within the production process to a ‘bottleneck’. Therefore some would argue that JIT systems are less flexible, or certainly allow less flexibility that TOC does (Yasin, Small et al. 1997).

Programme Evaluation and Review Technique (PERT)

Put simply a PERT map is a model of complex processes which occur to facilitate an outcome (Castro, Gómez et al. 2008). The PERT framework is very similar and often used in conjunction with a critical pathway diagram which shows the key processes involved in such an outcome (Mummolo 1997). PERT modelling makes a number of assumptions and has many conventions. In drafting a PERT chart the processes will be numbered in tens, to allow for further additions as the model grows. Further the model assumes that there is a linear relationship between the processes and therefore a number of key relationships (critical pathways) are determined (Cox 1995). These are often termed predecessor events and successor events. The PERT model deals with time in a number of ways giving an optimistic time and a pessimistic time for the completion of a process. It allows managers to view a project, task or process in a way which will help to maximise the efficiency of such a task in terms of a number of variables (Shipley, de Korvin et al. 1997).

Implementation of PERT requires a significant investment of time and expertise and so can have an impact on the costs of an activity, which must be weighed with the advantages or benefits such analysis brings to the process redesign (Azaron, Katagiri et al. 2006). Often PERT is a useful way to implement ‘Lean’ techniques of production as it allows the mapping of existing processes to look for ‘slack’ in the system. But its complexity can also be a disadvantage in terms of the time it takes to complete and the risk of errors in the model having unintended consequences to any new or redesigned process (Azaron, Katagiri et al. 2006).

PERT is most useful at outlining the dependencies of a process and the identification of the critical pathways which affect the outcomes of a process. Further the methodology allows for the identification of the benefits of early, late and slack starts or a process (Cox 1995). It is also a way of organising a large and complex amount of information I a way which is relatively easy to understand by non-specialist managers, and as such allows the input of many areas of speciality in the redesign process, some of which may not be heard in terms of purely operations or accounting systems such as JIT and TOC.

<标题>Yet PERT can have a number of significant disadvantages when used. First and foremost is the possibility of thousands of critical and interrelated aspect of a singly process (Mummolo 1997). The time taken to map out all of them can be considerable and even if they are all mapped out the subtle interrelationships are often difficult to place into such a restrictive framework. It is a given that in real life the process will not always work in the way in which it is modelled, and small changes across a few key aspects can vastly change the outcomes and behaviours of many of the assumptions behind PERT analysis. PERT is very useful in terms of initial investigation of a process or event, but it takes both art and science to appreciate how something will work in the real world situations of manufacturing or service industries. In this respect PERT should be seen only as an aid to understanding and not a ‘right’ answer (Castro, Gómez et al. 2008).

Conclusions

The three managerial tools which have been outlined in this report are all powerful providers of decision relevant information. Further all three allow the management to view not only the outcomes at the current time, but also to make significant changes to the processes of production or provision of services which can dramatically improve performance. The case given points to both poor profits and returns on investment and poor inventory management as problems for the company, as such it is important before any decisions are made about the implementation of new management practices, as to why these are occurring. If the drop in profits are due to a slackening of demand, a change to JIT and the attendant redesign of the business along ‘Lean’ philosophy may be significantly advantageous, as it will allow tight control over inventory and allow the company to respond to the needs of the market more effectively. By removing overproduction and inventory as wastes to the business, profits would be expected to recover, as long as the business is still a going concern (Hansen, Mouritsen 2006).

If, however, the company still has similar levels of demand for its products then the company will need to investigate where the problems in the existing processes are. TOC would be one way of looking at this problem, so too would JIT. It is felt if the levels of demand are broadly similar it may well be worth the management of the company undertaking some analysis of the business processes with a view to coming to a decision about the suitability of either TOC or JIT, but it must be appreciated that each of these approaches carry some significant costs and risk if the analysis is not well thought out. PERT analysis will map out the internal process and identify the various problems with slack and time, but it does not look in much detail at costs. Other methodologies the company may like to consider as a part of any process redesign are the Activity Based approaches to costing, management and budgeting, these fit well with JIT management, but not so well with TOC. TOC has significant limitations because it subordinates everything to the constraint, and as new constraints appear the process has to be restarted from scratch. This criticism also gives it the flexibility that the other systems mentioned herein do not possess. This report recommends that managers identify the reason for the falling profits, and look to find out why inventory is building up (are these a symptom of slack demand, or of inefficiencies within the business). Based on these findings a decision as to what further systems are needed can be made.

References

Abdul-Nour, G., Lambert, S. and Drolet, J., 1998. Adaptation of jit phylosophy and kanban technique to a small-sized manufacturing firm; a project management approach. Computers & Industrial Engineering, 35(3-4), pp. 419-422. 
Azaron, A., Katagiri, H., Sakawa, M., Kato, K. and Memarianai, A., 2006. A multi-objective resource allocation problem in PERT networks. European Journal of Operational Research, 172(3), pp. 838-854. 
Bragg, S.M., 2007. Throughput accounting: a guide to constraint management. Wiley. 
Castro, J., Gomez, D. and Tejada, J., 2008. A rule for slack allocation proportional to the duration in a PERT network. European Journal of Operational Research, 187(2), pp. 556-570. 
Cox, M., 1995. Simple normal approximation to the completion time distribution for a PERT network. International Journal of Project Management, 13(4), pp. 265-270. 
David, I. and Eben-Chaime, M., 2003. How far should JIT vendor–buyer relationships go? International Journal of Production Economics, 81-82, pp. 361-368. 
Davies, J., Mabin, V.J. and Balderstone, S.J., 2005. The theory of constraints: a methodology apart?—a comparison with selected OR/MS methodologies. Omega, 33(6), pp. 506-524. 
Dugdale, D. and Jones, T.C., 1998. Throughout Accounting: Transforming Practices?, The British Accounting Review, 30(3), pp. 203-220. 
Hansen, A. and Mouritsen, J., 2006. Management Accounting and Operations Management: Understanding the Challenges from Integrated Manufacturing. In: Christopher S. Chapman, Anthony G. Hopwood and Michael D.Sheilds, ed, Handbooks of Management Accounting Research. Elsevier, pp. 729-752. 
Houghton, E. and Portougal, V., 1997. Trade-offs in JIT production planning for multi-stage systems: balancing work-load variations and WIP inventories. International Transactions in Operational Research, 4(5-6), pp. 315-326. 
Kee, R. and Schmidt, C., 2000. A comparative analysis of utilizing activity-based costing and the theory of constraints for making product-mix decisions. International Journal of Production Economics, 63(1), pp. 1-17. 
Kelle, P., Al-Khateeb, F. and Anders Miller, P., 2003. Partnership and negotiation support by joint optimal ordering/setup policies for JIT. International Journal of Production Economics, 81-82, pp. 431-441. 
Khan, L.R. and Sarker, R.A., 2002. An optimal batch size for a JIT manufacturing system. Computers & Industrial Engineering, 42(2-4), pp. 127-136. 
Linhares, A., 2009. Theory of constraints and the combinatorial complexity of the product-mix decision. International Journal of Production Economics, 121(1), pp. 121-129. 
Mummolo, G., 1997. Measuring uncertainty and criticality in network planning by PERT-path technique. International Journal of Project Management, 15(6), pp. 377-387. 
Plenert, G., 1993. Optimizing theory of constraints when multiple constrained resources exist. European Journal of Operational Research, 70(1), pp. 126-133. 
Rand, G.K., 2000. Critical chain: the theory of constraints applied to project management. International Journal of Project Management, 18(3), pp. 173-177. 
Shipley, M.F., De Korvin, A. and Omer, K., 1997. Bifpet methodology versus PERT in project management: fuzzy probability instead of the beta distribution. Journal of Engineering and Technology Management, 14(1), pp. 49-65. 
Watson, K.J., Blackstone, J.H. and Gardiner, S.C., 2007. The evolution of a management philosophy: The theory of constraints. Journal of Operations Management, 25(2), pp. 387-402. 
Wei, C., Liu, P. and Tsai, Y., 2002. Resource-constrained project management using enhanced theory of constraint. International Journal of Project Management, 20(7), pp. 561-567. 
White, R.E. and Prybutok, V., 2001. The relationship between JIT practices and type of production system. Omega, 29(2), pp. 113-124. 
<标题>Yasin, M.M., Small, M. and WAFA, M.A., 1997. An empirical investigation of JIT effectiveness: an organizational perspective. Omega, 25(4), pp. 461-471.